Infrared Remote Control Unit (Rm-M010) - Sony HVO-4000MT Instructions For Use Manual

4k3d
Hide thumbs Also See for HVO-4000MT:
Table of Contents

Advertisement

WARNING
Using this unit for medical purposes
The connectors on this unit are not isolated.
Always use USB-compatible external hard drives and
USB memory devices that operate solely on the
power supplied by the unit.
Connecting a device that operates on an AC power
supply may result in an influx of leakage currents
from the connected device, which may in turn result
in electric shocks to the patient and operator.
If use of such devices cannot be avoided, be sure to
connect an isolation transformer to the power supply
of the connected device or connect an isolator
between the connection cables to isolate the power
supply, and verify that the risk of electric shock from
the system has been sufficiently reduced to levels that
conform to IEC60601-1 standards.
k
MENU MONITOR connector (15-pin mini D-
sub)
Connect a touch panel monitor or similar device here.
l
RS-232C connector (9-pin D-sub)
Use this to perform system controls from an external
device.
For details on system controls, see "[Control] Tab"
(page 64).
m
AUDIO (analog audio signal) output
connector (stereo mini jack)
Outputs analog audio signals.
n
MIC input connector (stereo mini jack)
Inputs analog audio signals from the microphone.
You can configure settings to supply power from the
unit.
AUDIO (analog audio signal) input connector
(LINE) (stereo mini jack)
Inputs analog audio signals.
Infrared Remote Control Unit (RM-
M010)
a
CAPTURE button
Use this to capture still images.
A chapter separator is also created at the position in
which the still image was captured.
For details on use, see "Capture Still Images"
(page 47).
b z REC button
Use this to start video/audio recording.
During recording, "REC" appears on the front panel
display in addition to the recording time.
For details on use, see "Manual Recording"
(page 46).
c X PAUSE button
Use this while recording is in progress to pause
recording. Press this button again to resume
recording.
A chapter separator is also created at the position in
which recording was paused.
You can also use this button to pause playback.
To resume playback, press this button again or press
the B PLAY button.
"PAUSE" appears on the front panel display during
pause.
d m REW button
Use this to rewind during playback of recorded data.
22

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvo-3300mt

Table of Contents