Table of Contents
Advertisement
Temperature
This product is designed for use under temperatures between 0°C and 40°C (32°F and
104°F).
Do not expose the product to extremely high temperatures (e.g. under direct sunlight
inside a vehicle) or high humidity.
To prevent moisture from condensing inside the product when you bring the product
directly from a cold to a warm location, first put the product inside a plastic bag and seal it
after removing the air from the bag. Then, bring the plastic bag and the product into the
room, and take the product out of the plastic bag after the temperature of the product has
reached the ambient temperature.
The performance of the batteries decreases at colder temperatures. Consider using new
batteries or spare batteries that have been kept warm instead. The low-battery indicator
may blink even when there is some power left in the batteries at cold temperatures. The
batteries will regain some of their capacity when warmed to a normal operating
temperature.
Other precautions
When storing, remove the batteries from the product. Storing the product with the batteries
inside may cause ignition or leakage.
Maintenance
Remove this product from the camera. Clean the flash with a dry, soft cloth. If there is sand
on the surface of the product, wiping it will damage the surface. Remove sand gently using a
blower. In the case of stubborn stains, wipe gently using a cloth lightly moistened with cold or
lukewarm water, and then wipe the product clean with a dry, soft cloth. Never use strong
solvents such as paint thinner, benzine, or alcohol, as these will damage the surface finish.
Advertisement
Table of Contents
