Table of Contents
Advertisement
●
When <Mode 1> or <Mode 2> is specified, printed images may be blurry.
Paper Curls
Are you using appropriate paper?
●
Check usable paper, and replace with appropriate paper. Also, specify the paper size and type settings
properly.
Available Paper(P. 701)
Loading Paper(P. 139)
Specifying Paper Size and Type(P. 159)
●
Change the setting of <Paper Curl Correction>. The improvement effect is stronger with <Mode 2> than
<Mode 1>. First try with <Mode 1>.
<Paper Curl Correction>(P. 474)
●
Setting a greater improvement effect may result in faded printouts or slower printing speed.
●
Reload the paper by changing the side to print on (front side/back side).
●
In rare cases the symptom may become worse depending on the paper. If this occurs, change the side to
print on back to the previous side.
Are you using paper that has absorbed moisture?
●
Replace with appropriate paper.
Loading Paper(P. 139)
●
Change the setting of <Paper Type> to a setting for thinner paper. For example, if the current setting is
<Plain 1>, change it to <Thin 1>.
Specifying Paper Size and Type(P. 159)
Available Paper(P. 701)
●
Change the setting of <Paper Curl Correction>. The improvement effect is stronger with <Mode 2> than
<Mode 1>. First try with <Mode 1>.
<Paper Curl Correction>(P. 474)
●
Setting a greater improvement effect may result in faded printouts or slower printing speed.
Troubleshooting
640
Advertisement
Table of Contents
