Table of Contents
Advertisement
Loading Envelopes
Make sure to flatten any curls on envelopes before loading them. Also pay attention to the orientation of envelopes
and which side is face up.
Before Loading Envelopes(P. 154)
In the Paper Drawer(P. 155)
In the Multi-Purpose Tray(P. 155)
●
This section describes how to load envelopes in the orientation you want, as well as procedures that you
need to complete before loading envelopes. For a description of the general procedure for loading
envelopes in the paper drawer or multi-purpose tray, see
Loading Paper in the Multi-Purpose Tray(P. 149) .
Before Loading Envelopes
Follow the procedure below to prepare the envelopes before loading.
●
On the MF634Cdw / MF632Cdw, only one envelope at a time can be loaded in the manual feed slot. Follow
steps 1 to 3 in the procedure below to prepare the envelope for loading.
1
Close the flap of each envelope.
2
Flatten them to release any remaining air, and make sure that the edges are pressed
tightly.
3
Loosen any stiff corners of the envelopes and flatten any curls.
Basic Operations
Loading Paper in the Paper Drawer(P. 141) or
154
1647-031
Advertisement
Table of Contents
