Play From Usb Device - Philips HTS3270 User Manual

Note
•
You may require more time to display the disc
content on the TV due to the large number of
songs/photos compiled onto one disc.
•
If the JPEG photo is not recorded with an 'exif '
type fi le, the actual thumbnail picture is not
shown on the display. It is replaced by a 'blue
mountain' thumbnail picture.
•
This product can only display digital camera
pictures according to the JPEG-EXIF format,
typically used by almost all digital cameras.
It cannot display Motion JPEG and pictures
in formats other than JPEG or sound clips
associated with pictures.
•
Folders/fi les that exceed the supported limit of
this product will not be displayed or played.
Control photo play
1
Play photo slideshow.
2
Use the remote control to control the
photo.
Button Action
Skips to the previous photo.
Skips to the next photo.
Rotates the photo clockwise.
Rotates the photo anti-
clockwise.
ZOOM
Zooms in or out of the
picture.
Play pause in zoom mode.
Stops play.
Play musical slideshow
Play MP3/WMA music fi les and JPEG
photo fi les simultaneously to create musical
slideshow. The MP3/WMA and JPEG fi les
must be stored on the same disc or USB
device.
1
Play MP3/WMA music.
2
Navigate to the photo folder/album and
press OK to start slideshow play.
Slideshow begins and continues till the
»
end of the photo folder or album.
Audio continues to play till the end of
»
the disc.
• To stop slideshow play, press
• To stop music play, press

Play from USB device

This product plays/views MP3, WMA, DivX
(Ultra) or JPEG fi les on the following USB
devices:
• digital camera that complies with the PTP
standard
• fl ash drive
• memory card reader
• HDD (external power source needed)
1
Connect a USB device to the
jack.
2
Press USB .
A contents menu is displayed.
»
3
Select a fi le to play, then press
Play starts.
»
• To stop play, press
USB device.
Note
•
If the device does not fi t into the USB jack,
connect it through a USB extension cable.
•
If you connect a multiple USB card/device
reader, only one card/device can be accessed.
.
again.
(USB)
.
or remove the
EN 27