Advertisement
6) Using a 3/8 drill bit, drill a hole through the strut mount.
7) Once the hole is done connect the bracket, knuckle, and strut assembly using a 3/8 x 2 ½ bolt and 3/8
lock nut.
8) Connect the bottom of the lift brackets to the knuckle using the two small spacers and 3/8 x 2 ½ bolt
and 3/8 lock nut. Place the small spacers between the knuckle assembly and the lift bracket.
9) Repeat the steps for the opposite side.
10) Place wheels back on ATV and torque all lugs to factory specifications.
4
Advertisement
