Advertisement
Front Lift
1) Place jack under center of ATV front end and lift until front wheels clear the ground. Be careful to
support ATV properly so that it is securely supported so that A-arms and struts are at full extension.
2) Remove front wheels.
3) Disconnect the strut from the knuckle assembly.
4) Connect the front lift brackets to the strut mount using the medium spacer, 3/8 x 2 ½ bolts and 3/8
lock nut.
5) Using a pencil, mark the new hole that will be needed to completely connect the brackets to the
knuckle.
3
Advertisement
