Chapter 5 Symbologies; Introduction - Motorola MX101 Product Reference Manual

Table of Contents

Advertisement

CHAPTER 5 SYMBOLOGIES

Introduction

This chapter describes symbology features and provides the programming bar codes for selecting these
features. Before programming, follow the instructions in
The scanner is shipped with the settings shown in
Default Parameters
programming is not necessary.
There are two ways to change a parameter value:
Scan the appropriate bar codes in this guide. These new values replace the standard default values in
memory.
For USB SNAPI hosts, send a "parameter send" command from the host system. Hexadecimal
parameter numbers are shown in this chapter below the parameter title, and options are shown in
parenthesis beneath the accompanying bar codes.
Select a host type (see each host chapter for specific host information) after the power-up beeps sound. This is
only necessary upon the first power-up when connected to a new host.
To return all features to default values, scan the
programming bar code menus, asterisks (
for all host device and miscellaneous defaults). If the default values suit requirements,
*
) indicate default values.
*
*
Indicates Default
Chapter 1, Getting
Table 5-1 on page 5-2
Set Default Parameter on page
Enable UPC-A
Feature/Option
(01h)
Option Hex Value
Started.
(also see
Appendix A, Standard
4-4. Throughout the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents