Radio Call Information; Repeater Or Talkaround Mode; Setting Tight Or Normal Squelch - Motorola P080 User Manual

RADIO CALL INFORMATION

REPEATER OR TALKAROUND MODE

Talkaround Mode enables you to communicate with
another radio when either:
¥ the repeater is not operating
ÑorÑ
¥ your radio is out of the repeaterÕs range but
within communicating distance of another
radio.
NOTE: The F symbol will appear on the LCD
screen when Talkaround Mode is selected.
To select either Repeater Mode or Talkaround
Mode:
Press the Repeater/Talkaround button (only
available if programmed by your dealer) to toggle
between the two modes. A positive indicator tone
indicates that the radio is in talkaround mode, while
a negative indicator tone indicates that the radio is
in repeater mode.
ÑorÑ
)
1. to enter Menu Mode.
< >
2.
or until
English 16
)
3.
<
4.
(talk through repeater),
or
(talk directly without going
through repeater).
)
5.

SETTING TIGHT OR NORMAL SQUELCH

Use this feature to Þlter out nuisance (unwanted)
calls and/or background noise. However, tightening
squelch could cause calls from remote locations to
be Þltered out as well. In this case, normal squelch
may be more desirable.To select tight or normal
squelch:
Press the Squelch button (only available if
programmed by your dealer) to toggle between tight
and normal squelch. A positive indicator tone
indicates that the radio is operating in tight squelch,
while a negative indicator tone indicates that the
radio is operating in normal squelch.
TLK ARD
to select
>
or until
until
to select the desired option.
TLK ARD
OFF
ON