Using The E529 - Honeywell K594.RF Product Manual

K595.RF Product Guide
If Using the E529:
1. In Service Parameter mode, go to the Io (I/O Map) parameter
2. Press OFF/AUTO button to view value.
3. Change the value to the desired I/O Map. If only using the K594 as a remote Motion Sensor and
NOT using its external input to monitor a door switch or other contact, use I/O Map 0. Otherwise,
select the appropriate I/O Map from the IOMap Summary table. Do nothing else on the E529 at
this point.
4. Press the blue S1 switch on the K595 to initiate binding. The K595 will broadcast a Bind Request
message. If the E529 saw the Bind Request, it will reply with a Bind Offer message. Upon seeing
the Bind Offer from the E529, the K595 will bind itself to the advertised Room ID and RF Settings.
If binding is successful, the K594 will:
Flash its Status LED 3 times
•
• Send the thermostat a message to sound its buzzer
Reset itself
•
• Send a device startup message that includes the K595 software version and its battery status.
IO Map
Summary
Rev 2.0 3/3/2017
IO Name
Map
0 Input Disabled/Not Used
1 Entry Door Inverted
2 Window
3 Window Inverted
4 Mini Bar
5 Mini Bar Inverted
6 Safe
7 Safe Inverted
8 Common Door
9 Common Door Inverted
10 Connecting Door
11 Connecting Door Inverted
12 Window Segment 0
13 Window Segment 0 Inverted
VIF VIF
Control Reinforcement
Frame
N/A N/A
0x028 0x029
0x02A 0x02A
0x02A 0x02A
0x025 0x025
0x025 0x025
0x026 0x026
0x026 0x026
0x064 0x064
0x064 0x064
0x065 0x065
0x065 0x065
0x1E 0x1E
0x1E 0x1E
7