Table of Contents
Advertisement
Arlo Baby Characters
Arlo Baby cameras come with a bunny character set. You can
remove the bunny character set and replace it with other Arlo
Baby characters.
• Pull the character ears
• Rotate the character
up to remove them.
feet and pull them off
• To install character
to remove them.
ears, align the ears
with the camera lens
and press them onto
the camera.
14
• To install character
feet, align the foot
plate with the holes
on the bottom of the
camera and rotate
the foot plate until it
clicks into place.
Camera LED Guide
Solid amber
The camera is
booting.
Double blink
amber every 10
seconds
The camera battery
charge is low.
Fast blinking
amber
The camera is not
connected to a
WiFi network.
Solid blue
Solid purple
The camera is
The camera is
powered on and is
connected to a WiFi
connected to the
network. However, it
Internet.
is not connected to
the Internet.
Fast blinking
Blinking purple
blue
The camera is too
The camera is
far away from the
connecting to the
router.
Internet.
Blinking blue and
Fast blinking
blue for three
amber
seconds
A firmware update
is in progress. DO
The camera was
connected to a
NOT TURN OFF THE
charger.
CAMERA.
Off
The camera is
powered off.
15
Advertisement
Table of Contents
