Makita DA4030 Instruction Manual page 7

ASSEMBLY
Installing side grip (auxiliary handle)
CAUTION
*Always be sure that the tool is switched off and unplugged before installing or removing
*Always be sure that the side grip is installed securely
Screw the side grip on the tool securely
The side grip can be installed
on
either side
of the tool
the side grip
Side grip
I
Spade grip
The spade grip can be installed in any position as shown in the figure To change the posi-
tion, loosen the hex bolts (both sides) with a hex wrench and turn the spade grip to the
desired position Then tighten the hex bolts securely After reposition the grip. return the
hex wrench to the wrench holder
Spade
gr
M
CAUTION:
*Do not fix the spade grip beyond the limits of the arrow. Be cautious that your hand is
not caught in the grip. Keep the hand away from the drill chuck. They can lead to serious
accidents.
*Always be sure that the hex bolts (both sides) of the spade grip are tightened securely.
7