Table of Contents
Advertisement
5 Configure advanced
settings
This section describes how to configure the advanced settings for the
TV such as volume, channel, picture format, power mode, picture, sound,
security, control, ratings, and hotel information.
Access the configuration menu
1
Press M on the setup remote control to display the setup menu.
2
to select CONFIGURATION.
Press
CONFIGURATION
SWITCH ON / OSD
PICTURE / SOUND
SECURITY
CONTROL
SMARTFEATURES
AUDIO FEATURES
CC / V-CHIP
HOTEL INFORMATION
3
Press
to select one of the following to configure the
settings:
SWITCH ON/OSD: Sets the default value for settings such
•
as volume, channel, picture format, and power mode. These
values are used when the TV is switched on.
PICTURE/SOUND: Sets the picture and sound settings for
•
the TV.
SECURITY: Sets the level of security by configuring the
•
settings such as, TV lock, RC lock, decryption control and
V-track.
CONTROL: Sets the control settings such as ESP, Smart
•
Guide, and SmartWindow.
SMARTFEATURES: Sets the SmartPower, USB break-
•
in, SmartGuide Category, SmartUpdate, and software
download settings.
AUDIO FEATURES: Sets the correct audio source.
•
CC/V-CHIP: Sets the closed caption settings and ratings.
•
•
HOTEL INFORMATION: Set the hotel information
including hotel name and room number.
Configure the switch-on settings
1
Press M on the setup remote control to display the setup menu.
2
Press
to select CONFIGURATION > SWITCH ON/
OSD.
WELCOME MESSAGE
SWITCH ON CHANNEL
SWITCH ON SMARTGUIDE
SWITCH ON VOLUME
SWITCH ON PIC FMT
POWER ON
VOLUME INDICATOR
CHANNEL DISPLAY
3
Press
•
WELCOME MESSAGE: Sets or clears a welcome message.
>
•
SWITCH ON CHANNEL: Sets a channel that is displayed
>
when the TV is turned on.
>
•
SWITCH ON SMARTGUIDE: Sets the display of
SmartGuide categories screen when the TV is turned on.
>
•
SWITCH ON VOLUME: Specifies the volume at which the
>
TV is turned on.
>
•
SWITCH ON PIC FMT: Sets the picture format that is used
>
to display.
>
•
POWER ON: Sets the power mode that is used when the
TV is turned on.
•
VOLUME INDICATOR: Sets the display of volume
indicator.
•
CHANNEL DISPLAY: Sets the display of channel number
and channel name on the screen.
Configure the picture and sound settings
1
Press M on the setup remote control to display the setup menu.
2
Press
SOUND.
BRIGHTNESS
COLOR
CONTRAST
SHARPNESS
TINT
ACTIVE CONTROL
TREBLE
BASS
BALANCE
AVL
3
Press
SWITCH ON / OSD
WIDESCREEN
LAST STATUS
to set the following values:
to select CONFIGURATION > PICTURE/
PICTURE / SOUND
to adjust a setting for your TV.
>
TV 2
YES
30
YES
ALL
45
38
70
50
36
YES
52
55
0
ON
EN
5
Hide quick links:
Advertisement
Table of Contents
