Take A Photo Or Video; Restart The Computer - Honeywell DOLPHIN CT50 NON-INCENDIVE Quick Start Manual

Take a Photo or Video

1. Press the Camera button.
2. Select either single photo mode
viewfinder.
3. Point the camera lens at the object you want to capture. The camera lens
is located on the back of the computer.
4. Touch the single photo icon to capture a single photo.
Touch the video icon to start recording video. Touch the video icon
again to stop recording.
5. To view the captured photo or video, touch the preview circle in the upper
right corner.

Restart the Computer

You may need to restart the computer to correct conditions where an
application stops responding to the system or the computer seems to be
locked up.
1. Press and hold the Power button until "slide down to power off" appears
on the screen.
2. Slide the window down to the bottom of the screen. "Goodbye" appears
on the screen before the computer turns off.
To restart the computer if the touch panel display is unresponsive:
• Press and hold the Power + Volume Down buttons for approximately 13
seconds until the computer restarts.
Note: If you try to restart the computer and still experience issues, you may
need to see the user guide for information on how to perform a Factory Reset
(Clean Boot).
or video mode in the