Debug Backup - Cisco Catalyst 2960 Command Reference Manual

debug backup

debug backup
Use the debug backup privileged EXEC command to enable debugging of the Flex Links backup
interface. Use the no form of this command to disable debugging.
Syntax Description
all
errors
events
Command Default
Backup interface debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines The undebug backup command is the same as the no debug backup command.
Related Commands Command
show debugging
Catalyst 2960 Switch Command Reference
B-4
debug backup {all | errors | events}
no debug backup {all | errors | events}
Display all backup interface debug messages.
Display backup interface error or exception debug messages.
Display backup interface event debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration
Guides and Command References > Cisco IOS Configuration
Fundamentals Configuration Guide, Release 12.2 > System
Management > Troubleshooting and Fault Management.
Appendix B Catalyst 2960 Switch Debug Commands
78-16882-01