Port And Access Name Settings - D-Link DCS-7110 User Manual

Configuration
HTTPS
By default, the HTTPS port is set to 443. You can assign it to another port number between
1025 and 65535.
FTP
The FTP server allows the user to save recorded video clips. You can utilize D-Link's IP Cam
Wizard to upgrade the firmware via FTP server. By default, the FTP port is set to 21. It also
can be assigned to another port number between 1025 and 65535.
HTTP
By default, the HTTP port is set to 80 and the secondary HTTP port is set to 8080. They can
also be assigned to another port number between 1025 and 65535.
Authentication: Depending on your network security requirements, the camera provides
two types of security for an HTTP transaction: Basic or Digest.
• If Basic authentication is selected, the password is sent in plain text format and
there can be potential risks of being intercepted.
• If Digest authentication is selected, user credentials are encrypted using MD5
algorithm and thus provide better protection against unauthorized access.
Access name for stream 1 ~ 5: The camera supports multiple streams simultaneously.
The access name is used to differentiate the streaming source. Refer to "Video Settings" on
page 29 to set up the video quality for each stream.
D-Link DCS-7110 User Manual

Port and Access Name Settings

38