Special Menu - Epson AcuLaser C9200N Service Manual

EPSON AcuLaser C9200N

7.4.2 Special Menu

The following special adjustment menu is provided.
The underlined values are default values.
SUPPORT MENU
Setting item Settings
Support Execute
StatusSheet
LCD Backlight Auto On Off
Format Execute
CompactFlash
Format PS3 Execute
CompactFlash
Delete All Execute
CompactFlash
Data
PRINTER ADJUSTMENT FUNCTION
Setting item Settings
Highland 0 ~ 1
Feed Offset -3.5 ~ 0.0 ~ 3.5
Scan Offset -3.5 ~ 0.0 ~ 3.5
Feed Offset2 -3.5 ~ 0.0 ~ 3.5
Scan Offset2 -3.5 ~ 0.0 ~ 3.5
APPENDIX
Downloaded from www.Manualslib.com
Explanation
Prints the Support Status Sheet.
Sets the operation of LCD Backlight.
Formats the CompactFlash.
Deletes all CompactFlash data.
Explanation
White spots may appear when using the printer in
a highland area. In such case, this setting is set to
"1". Therefore, developing bias is changed to
prevent some wrong.
Sets Physical offset for the front of a page in the
paper feeding direction.
Sets Physical offset for the front of a page in the
scanning direction.
Sets Physical offset for the back of a page in the
paper feeding direction.
Sets Physical offset for the back of a page in the
scanning direction.
Control Panel Special Operations
manuals search engine
Setting item Settings
TR Normal -5 ~ 5
TR Thick -5 ~ 5
TR ExtraThk -5 ~ 5
TR SuperThk -5 ~ 5
TR Envelope -5 ~ 5
TR Tmsprnc -5 ~ 5
TR Card -5 ~ 5
TR NormalBack -5 ~ 5
TR ThickBack -5 ~ 5
TR ExtraThkBack -5 ~ 5
TR SuperThkBack -5 ~ 5
TR Card Back -5 ~ 5
Max Density K -10 ~ 10
Max Density C -10 ~ 10
Max Density M -10 ~ 10
Max Density Y -10 ~ 10
Blur Margin K -5 ~ 5
Blur Margin C -5 ~ 5
Blur Margin M -5 ~ 5
Blur Margin Y -5 ~ 5
Definition Noise 0 ~ 3 ~ 7
Gradation Noise 0 ~ 3 ~ 7
Calibration Execute
Color DiagnosisSht Execute
Revision D
Explanation
Sets the secondary transfer bias for each paper
type. Setting items with "Back" are for the back of
papers.
Sets the max density for each color. This setting is
executed to heighten a color. This setting is
available after executing calibration.
Sets the blur margin for each color.
This setting is not used for the service since it is a
menu for development.
This setting is not used for the service since it is a
menu for development.
Executes the calibration of engine.
Prints a sheet for the check of image quality.
Confidential
349