Epson AcuLaser C9200N Service Manual page 188

EPSON AcuLaser C9200N
D10
[2]
When replacing the PH Unit, replace four units at the same time.
Even when the single Unit needs to be replaced, replace four units.
1. Remove three Screws [1], three Connectors [2], and three Photoconductor Unit Guide rails
[3].
DISASSEMBLY AND ASSEMBLY
Downloaded from www.Manualslib.com
PH Unit
[1]
[3]
4038F2C106DA
manuals search engine
When installing the Photoconductor Unit Guide rail, insert its end correctly to the
mounting hole in the Main Unit side.
Main Unit Disassembly/Reassembly
Revision D
188
Confidential