Connecting The Video Recorder; Preparing The Remote Control For Operation; Connecting With A Scart Cable - Philips VR150/58 User Manual

Video recorder
Hide thumbs Also See for VR150/58:
Table of Contents

Advertisement

3. Connecting the video recorder

Preparing the remote control for
operation
The remote control and its batteries are packed
separately in the original video recorder packag-
ing. You must install the batteries in the remote
control before use.
1.
1.
Take the remote control and the enclosed
batteries (2 batteries).
2.
2.
Open the remote control's battery compart-
ment and place the batteries in it as shown in
the picture and close the battery compart-
ment.
The remote control is now ready to use. Its
range is approximately 7 metres.
Connecting your video recorder to
the TV
The necessary cable connec-
tions must be made before
you can record or playback
TV programmes using your
video recorder.
We recommend that you use a scart cable to con-
nect your TV and video recorder.
What is a scart cable?
The scart or Euro AV cable serves as the uni-
versal connector for picture, sound and control
signals. With this type of connection, there is
practically no loss of quality during the picture
or sound transfer.

Connecting with a scart cable

Have the following
cables ready:
an aerial cable (1, sup-
plied), a scart cable (2,
not supplied).
1.
1.
Remove the aerial
cable plug from your
TV. Insert it into the
AERIAL at the back
of the video recorder.
2.
2.
Insert one end of the
supplied aerial cable
into the RF OUT at
the back of the video
recorder and the
other end into the
aerial input socket at the back of the TV.
3.
3.
Plug one end of a
scart cable into the
scart socket 'TV' at
the back of the video
recorder and the other end into the suitable
scart socket on your TV reserved for the
video recorder operation (see your TV's oper-
ating instructions).
4.
4.
Switch on the TV.
5.
5.
Insert AC cable into the wall socket.
My TV has several scart sockets. Which one
should I use?
Select that scart socket which is suited for the
video output as well as for the video input.
My TV has a configuration menu for the
scart socket.
Please configure this scart socket as input-
Output.
4
1
2
AERIAL
TV
A E R I A
L
R F O U
T
TV
RF OUT
L
A E R I A
R F O U
T
TV
A E R I A
L
TV
R F O U
T
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xx-vr150/58

Table of Contents