Vcr Playback; Starting Vcr Playback - Philips DVDR3430V User Manual

Starting VCR playback

This VCR uses the VHS system.
A
Press STANDBY-ON to turn on the
recorder.
B
Press VCR on the remote control.
The VCR indicator lights up.
C
Insert a pre-recorded VHS tape into the
tape deck with the window side facing up
and the label side towards the front.
D
Playback will start automatically.
Otherwise, press u.
To pause playback
Press u.
To resume normal playback, press u.
For fast forward/backward search
Press à (REW) or á (FFW).
To resume normal playback, press u.
To search a specifi c recording (using
index function)
Press PREV í/ NEXTë to search
the previous or next index marking
within the tape.
E
To stop playback, press STOP x.
To eject the VHS tape, press EJECT ç.
F
Helpful Hints:
– If you want to return to tuner mode during
VCR playback, press SOURCE button.
– If you wish to watch the disc playback,
press DVD to change to DVD mode before
starting playback the disc. If you press VCR
to watch the VCR playback again, playback
resumes from the point where playback was
interrupted.
– When playing back tapes recorded using
the S-VHS system, the playback image may
be distorted.
TIPS: The operating features described here might not be possible for certain VHS tapes.

VCR Playback

Reset tape counter
Press CLEAR on the remote control to
set the counter to "0:00:00".
When you insert a VHS tape in the
recorder, the counter will automatically
reset to "0:00:00".
Manual tracking
This recorder has automatic tracking
capability to reduce the picture and
sound interference of a poor quality VHS
tape. However, you may have to do a
manual tracking if these cannot be
completely fi lter out.
A Press P +- on the remote control
until you get a better picture/sound
quality.
B
Press STOP x to confi rm.
Tracking is automatically reset to
normal when the tape is ejected.
43