Connecting The Audio Cables; Step 1: Basic Recorder Connections - Philips DVDR3430V User Manual

Step 1: Basic Recorder Connections

ANTENNA
2
EXT AUX - I/O
EXT 1 TO TV - I/O
TV

Connecting the audio cables

This connection enables you to listen to
the playback from the recorder.
However, this connection is not required
if the recorder is connected to the TV
using the SCART cable.
Option 1: Using an audio cable
You can connect the recorder to a two
channel stereo system (mini system, TV)
or receiver in order to enjoy the stereo
sound system.
Use an audio cable (red/white ends - not
supplied) to connect the AUDIO L/R
OUTPUT sockets to the audio input
sockets of the connected device.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
VIDEO
(CVBS) Y
S-VIDEO
(Y/C) L P
B
AUDIO
P
R R
COMPONENT
AUDIO VIDEO
AUDIO / VIDEO OUT AUDIO / VIDEO OUT 1
Option 1
COAXIAL
DIGITAL AUDIO OUT
Option 2
AV amplifi er/
receiver
Option 2: Using a coaxial cable
You can connect the recorder to an AV
amplifi er/receiver with a digital multi-
channel sound decoder in order to enjoy
multi-channel surround sound.
Use a coaxial cable to connect the
COAXIAL (DIGITAL AUDIO)
socket on the recorder to the digital
input socket on the amplifi er/receiver.
Before you start operating, set the digital
audio output settings accordingly (see the
section "DVD Setup Menu Options –
PLAYBACK settings – Digital Audio
Output").
If the setting does not match your
stereo's capabilities, the stereo may
produce a strong, distorted sound or no
sound at all.
(continued)
~
MAINS
17