Specifications; Safety Instructions - Makita VR251D Instruction Manual

SPECIFICATIONS

Vibrations per minute (min
Vibrations amplitude
Vibration head (diameter x length)
Flexible shaft assembly length
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for removing bubbles from concrete
when casting concrete.
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is not more
than 70 dB (A).
The noise level under working may exceed 85 dB (A).
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s

SAFETY INSTRUCTIONS

WARNING:
When using battery operated tools basic safety precautions, including the
following, should be followed to reduce the risk of fire, leaking batteries and
personal injury: Read these instructions before operating this product and
save these instructions.
For safe operations:
Keep work area clean.
1.
Cluttered areas and benches invite injuries.
Consider the work environment.
2.
Do not expose the tool to rain. Keep work area well
lit. Do not use tools in the presence of flammable
liquids or gases.
Keep children away.
3.
Do not let visitors touch the tool. Keep visitors away
from work area.
Store batteries or idle tools.
4.
When not in use, tools and batteries should be
stored separately in a dry, high or locked up place,
2
Model
-1
)
Overall length
Net weight
Rated voltage
2
.
25 mm x 221 mm
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product
is in compliance with the following standards of stand-
ardized documents, EN50260, EN55014 in accordance
with Council Directives, 89/336/EEC, 98/37/EC.
Yasuhiko Kanzaki CE 2003
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
out of reach of children.
Ensure that battery terminals cannot be shorted by
other metal parts such as screws, nails, etc.
Do not force the tool.
5.
It will do the job better and safer at the rate for which
it was intended.
Use the right tool.
6.
Do not force small tools or attachments to do the job
of a heavy duty tool. Do not use tools for purposes
not intended.
Dress properly.
7.
Do not wear loose clothing or jewellery, they can be
caught in moving parts. Non-skid footwear is recom-
VR251D
12,500
1.0 mm
1,200 mm
1,431 mm
3.2 kg
D.C. 12 V
Director
ENA002-2