Memopal Settings - ZyXEL Communications NAS326 User Manual

The following table describes the labels in this screen.
Table 130 Memopal > Status
LABEL
Status
To Backup
Backed up
Failures
Upload Speed
Progress
Restart Backup
Retry Failures
Backup Report

13.9.2 Memopal Settings

Use this screen to enable and configure Memopal backup settings. Click Memopal > Settings on the
Desktop to open the following screen.
Chapter 13 App Center and Packages
DESCRIPTION
This shows the status of the Memopal application's interaction with the Memopal server.
Disabled: The NAS Memopal application is turned off.
Starting: The backup job is initializing and the NAS is getting ready to back up.
Running: The backup job is executing.
Stopped: The backup job is stopped. This may be due to a network error, remote server
error, or other issue.
Completed: The backup job finished.
The number of files remaining to back up.
The number of files backed up already.
The number of files the NAS failed to back up to the Memopal server.
This is how fast in Bytes per second the NAS is backing up to the Memopal server.
This shows the percentage of the files already backed up from the total files to be backed
up.
This button is available only when you enable Memopal in the Memopal > Settings screen.
Click this to re-scan all files and perform a backup.
This button is available only when you enable Memopal in the Memopal > Settings screen.
Click this to only re-scan and back up files the NAS failed to back up.
This button is available only when you enable Memopal in the Memopal > Settings screen.
Click this to display backup record details.
NAS Series User's Guide
228