Log Screen - ZyXEL Communications NAS326 User Manual

Table 106 Control Panel > Maintenance > Power > Power On/Off Schedule: Add (continued)
LABEL
Execute Time
(hh:mm)
Use this part of the screen to configure power on, power off, and reboot times.
Please select the
day of the month
Every how many
weeks?
on every
Every
Apply
Cancel

11.4 Log Screen

Click Control Panel > Service > Maintenance > Log to open the following screen.
Use this screen to display all NAS logs. There are at most 512 entries in the log. Older logs are removed by
the system. You cannot download the log file via FTP or CIFS.
Chapter 11 Control Panel: Maintenance
DESCRIPTION
Enter the time, day, and/or day of the month as appropriate for this power control schedule
entry. Leave more than 10 minutes between the execution times of the entries.
If the NAS turns off or restarts while a user is transferring files to or from the NAS, the transfer fails.
The user will need to restart the transfer.
The NAS skips a scheduled restart or power off if the execution time comes while the NAS is
doing any of the following:
• Resynchronizing a RAID
• Upgrading firmware
• Replacing the configuration file
If the NAS is turned off at the time when a restart or power off is scheduled, the NAS does not
perform the restart or power off.
If the NAS is turned on at the time when a power on is scheduled, the NAS does not perform the
power on.
This is only available if you set the Frequency to Monthly.
Choose the day of each month for the power control schedule entry.
This is only available if you set the Frequency to Weekly.
Enter the interval between weeks.
This is only available if you set the Frequency to Weekly.
Choose the day of the week for the power control schedule entry
This is only available if you set the Frequency to Daily.
Enter the interval between days for the power control schedule entry.
Click this to save your changes.
Click this to return to the previous screen without saving.
NAS Series User's Guide
182