Baumatic B6FS User Manual page 14

TYPE OF
HOT PLATE
Gas hot plate
ATTENTION!!!
If the power supply cable is replaced, the installer should leave the ground wire longer ( B) than the phase
conductors (fig. 16) and comply with the recommendations given in paragraph 6.
WARNING!
In the envelope you will find the duplicate parts of the rating plate,
which must be applied in the cabinet near the hob to be displayed
easily in case of maintenance.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified person i n order to avoid a hazard.
SERVICING
CABLE TYPES AND SECTIONS
WARNING: MAINTENANCE MUST ONLY BE
PERFORMED BY AUTHORIZED PERSONS.
TYPE OF
CABLE
H05 RR - F
FIG. 22
14
SINGLE - PHASE
POWER SUPPLY
2
Section 3 x 0.75 mm