Protection Of Cable From Water; Connecting The Dvr - Samsung SDC-9443BC User Manual

protection of cable from Water

If this product is mounted outdoor, water leakage may occur at gap between cables. As shown below, butyl rubber (available on the
market) shall be used to protect from water.
1. Connect power supply and BNC power source.
2. Cover black sheath of the cable (Zone A), and ensure half of butyl rubber can cover the cable joint.
Poor water protection at the cable sheath may cause water leakage. Make sure to wrap tightly.
`
J
The water-proof butyl rubber is made of rubber that expands to twice the original length.
`
If you do not use cable joint, it must be covered with water-proof tape.
`

connecting the dvr

Connect the BNC connector of the camera to the enclosed 60ft camera cable, and then connect the BNC connector of the camera
cable to the BNC Video Input port of the DVR.
VID EO
IN
The way to connect the power adaptor to the camera may vary depending on the DVR model. You may select one among the methods provided
`
J
above as appropriate.
AU DIO
IN
AU DIO VG A
OU T
+-
RS 485
PO WE
US B R
CO NS
OL E
HD MI
LA N
DC 12
V
LA N
AUD IO
OU TPU
T
HD MI
VG A
US B
English _5