When checking the DIGITAL P.C.B.:
•
Put the rubber sheet and cloth over this unit, and
place the DIGITAL P.C.B. on them. (Fig. 5)
•
Connect ST951 on DIGITAL P.C.B. to the chassis
with a ground lead. (Fig. 5)
•
Reconnect all cables (connectors) that have been
disconnected. Be sure to use the P.C.B. CHECKING
JIG (Part No. ZG780000) to connect between the
following connectors.
CB62 on DIGITAL P.C.B. – CB271 on MAIN (3) P.C.B.
CB63 on DIGITAL P.C.B. – CB251 on MAIN (2) P.C.B.
•
When connecting the flexible flat cable, be careful
with polarity.
Rubber sheet and cloth
ゴムシー トと布
DIGITAL P.C.B.
ST951
Ground lead
アース線
Fig. 5
RX-V475/HTR-4066/RX-V500D
DIGITAL P.C.B. をチェックする場合には:
・ 本機の上にゴムシートと布を敷き、その上に DIGITAL
P.C.B. を置きます。 (Fig. 5)
・ DIGITAL P.C.B. の ST951 のアースをリード線でシャー
シに接続してください。 (Fig. 5)
・ 外したケーブル(コネクター)をすべて接続しま
す。 た だ し 下 記 の コ ネ ク タ ー 間 を 接 続 す る に は
P.C.B. チェック用ジグ(部品番号 : ZG780000)を使
用してください。
DIGITAL P.C.B.のCB62 ‒ MAIN (3) P.C.B.のCB271
DIGITAL P.C.B.のCB63 ‒ MAIN (2) P.C.B.のCB251
・ フラットケーブルを接続する際、極性に注意してく
ださい。
CB62
P.C.B. CHECKING JIG
CB63
P.C.B.チェック用ジグ
CB271
CB251
MAIN (2) P.C.B.
Chassis
シャーシ
MAIN (3) P.C.B.
21