Positioning Of Stitch Selector Stitch Displays (Px300, Px200, Px100) - Brother XL5300 Service Manual

Positioning of Stitch Selector Stitch Displays
(PX300, PX200, PX100)
Standard
• When selecting dial is turned, each stitch should be visible in center of stitch display window.
Adjustment
1. Vertically position selecting cam shaft pin .
2. Line up stitch display rack with stitch images.
PX300 PX200 PX100 Pattern
1 1 1 a/c Buttonhole
3. Set selecting dial key in middle of slot of stitch display gear key. When key slots are filled on both
sides, the stitch display rack will move 1mm to the left and right.
4. Set selecting cam shaft in selecting dial slot .
5. After selecting dial is assembled, images of each stitch should be centered in stitch display window.
- 26 -