● Connection
1. Set the switch (SW301) of RS232C conversion
adaptor to the "FLASH UCOM" position. (Fig. 1)
2. Connect the writing port (CB212 of MAIN P.C.B.)
of this unit to the serial port (RS232C) of the PC
with RS232C cross cable, RS232C conversion
adaptor and flexible flat cable as shown below.
(Fig. 1)
PC
Serial port (RS232C)
RS232C cross cable /
RS232C クロスケーブル
● 接続
1. RS232C 変 換 ア ダ プ タ ー の ス イ ッ チ(SW301)
FLASH UCOM 側に設定します。 (Fig. 1)
2. 本機の書き込み用ポート(MAIN P.C.B. の CB212)
と PC のシリアルポート(RS232C)を下記のよう
に接続します。 (Fig. 1)
RS232C conversion adaptor /
RS232C変換アダプター
SW301
FLASH
Flexible flat cable (9P) /
OTHER
UCOM
カード電線 (9P)
Fig. 1
CRX-330/NS-BP110/NS-BP100
19