Trigger Connection - Yamaha MusicCast R-N2000A User Manual

PREPARATION > Connecting speakers

Trigger connection

Connecting a trigger-connection compatible Yamaha device
The trigger function allows external devices to be controlled linked with the operation (power ON/OFF) of
this product. If you are using a Yamaha subwoofer that supports system connections, or a device with a
Trigger IN jack, you can use the trigger function by connecting it to a TRIGGER OUT jack of this product via a
mono mini-plug cable.
When this product is turned ON, it outputs a signal (12 V, 0.1 A) from the TRIGGER OUT jacks, linking them.
TRIGGER OUT jacks
TRIGGER
OUT
DIGITAL IN
12V 0.1A
USB
2 SPEAKERS L CH
OPTICAL COAXIAL
ANALOG IN
LINE 1
SUBWOOFER
OUT
A
LINE 2 PRE OUT
L R L
TRIGGER
B
OUT
12V 0.1A
Rear panel
NOTE
On some Yamaha subwoofers, the trigger connection may be called "System Connection".
System
Connection
jack
NETWORK
System Connection compatible
Yamaha subwoofer, etc.
32