1-3] Option - Panasonic KX-NCP500 Pc Programming Manual

3.40 [1-3] Option

System options can be programmed.
It is possible to clear the master CS information (Master CS Port and Radio System ID) by following the
procedure below in batch mode:
1.
Click Clear Master CS.
2.
Click Yes. To abort the procedure, click No.
If the system data is downloaded to the PBX after the master CS information has been cleared, it is necessary
to register all PSs again in the interactive mode. Master CS information will be assigned automatically when
a CS is connected to the PBX. Without the Radio System ID, PSs cannot be registered.
System Wireless—System ID
Indicates the radio system ID used to register a PS (reference only).
Default
Not stored.
Value Range
Not applicable.
Maintenance Console Location
3.40 [1-3] Option
Programming Manual References
None
Feature Manual References
None
New Card Installation—Card Status for any Card
Selects the initial status of cards after installation.
Default
In Service
Value Range
In Service, Out of Service
Maintenance Console Location
3.40 [1-3] Option
Programming Manual References
None
Document Version 2009-12
3.40 [1-3] Option
PC Programming Manual 309