Setting Up Your Camera - D-Link DCS-935L Quick Install Manual

Please follow the instructions below to set up your mydlink camera.
1
On your mobile device, download mydlink Home by going to
mydlinkhomeapp.dlink.com, or by searching for mydlink Home in the
iTunes App Store or Google Play.
2
Launch the mydlink Home app and create a new account or sign in to
your existing account.
iOS: If you are asked about allowing the app to
access your location, select Allow.
Android: Make sure location services are turned on
in your phone's settings.
3
After logging in, tap the Settings icon
Add New Device, and follow the instructions.
When you are asked to scan a QR code, use the code on the Quick Install
Card in your package, or on the label attached to your device.
Congratulations, your DCS-935L is now ready to use! Be sure to check the
support.dlink.com website periodically for the latest firmware updates to keep
your product up to date with the latest features.
Note: If you experience issues registering this camera with your mydlink account, or if you
purchased an open box or resold unit, perform a hard reset by pressing and holding the reset
button on the device for 10 seconds while the device is powered on. If you are returning the
device to the place of purchase, please perform the hard reset procedure to clear the
device of any personal data.

Setting Up Your Camera

in the top-left corner, select
4