Mmc 81 Smdr Options - Samsung NX-308 Technical Manual

4Programming 1999.9.15 12:44 PM 페이지69
NX-SERIES
HYBRID KEY SYSTEM
MMC 81
This MMC allows the system administrator to select information to be printed on the SMDR report.
OPTIONS
PAGE HEADER
LINE PER PAGE
INCOMING CALL
AUTHORIZE CODE
LESS START TIME
ALARM
COMPANY NAME
PROCEDURE
1. Press [TRANSFER] and dial 81
2. Press [VOLUME (-) or (+)] to select the parameter
3. Press [MUTE] or [MESSAGE] to select data
OR
Using KEYPAD, dial
0 for NO
1 for YES
In case of LINE PER PAGE, enter the line number (17~99)
4. In case of COMPANY NAME, refer to MMC 14
(STATION NAME)
5. Press [TRANSFER] to save and exit
DEFAULT DATA
PAGE HEADER
INCOMING CALL
LESS START TIME
COMPANY NAME
RELATED MMC
MMC 80 IO PARAMETER
DESCRIPTIONS
This option determines whether a page header will print at the top
of each page. Normally turned off if SMDR is sent to a call
accounting machine.
This option selects the length of each page to determine where to print the
SMDR header. The number of lines may be in the range 10 through 99.
This option determines whether or not incoming calls will print on SMDR.
This option determines whether or not the table of authorization
codes will print on SMDR.
This option determines whether or not valid calls will include the
minimum call time in total call duration.
This option determines whether or not stations receiving an alarm
reminder call will print on SMDR.
This option allows the system administator to enter a 16 character
name which will appear in the SMDR header.
: YES
: NO
: NO
: NONE
PROGRAMMING SECTION
SMDR OPTIONS
LCD DISPLAY
LINE PER PAGE
AUTHORIZE CODE
ALARM
: 66
: YES
: NO