Working With The Com Port; To Add A New Remote Networking Connection - GE IC754VSI06SKD User Manual

3
Shielding
To add a n e w remote n e two rki ng co nn ection
6" QuickPanel View Keypad
40
D e t a i l e d O p e r a t i o n
Communication Port
Shielded cable is required for compliance with CE and FCC requirements. The
cable shield should be connected to the metal connector shell or by pin #1 of the
QuickPanel 25-pin serial connector. Shield and cable ground (pin #7 of the 25-pin
connector or pin #5 of the 9-pin connector) should not be connected directly
together.
The Frame Ground (pin #1) of the QuickPanel View should be used for attaching
the cable shield in these applications.
Caution: Do not connect Signal Ground (pin #7) to Frame Ground (pin #1) on the
QuickPanel View Keypad, except in the specific and limited circumstances noted
in the Grounding section above.
W o r k i n g w i t h t h e C O M p o r t
1. From the Start menu, tap
The Connection window appears.
2. Double-tap Make New Connection.
The Make New Connection window appears.
3. Type a name for the new connection.
4. Choose a connection type. If you are configuring a Modem, choose Dial-Up Connection. If you have a Device,
select Direct Connection.
5. Tap Next.
Settings and then
Network and Dial-up Connections.
GFK-2357A