Installation Manual of Network Camera
Tilt Adjust Table
Tilt Adjust Screw
Figure 4-97 Remove the Tilt Adjust Table
2. Secure the wall bracket to the wall with the screws.
Wall
Figure 4-98 Secure the Wall Bracket
3. Fit the tilt adjust table to bottom of the bullet camera, and then fix it with two set screws.
Set Screw
Set Screw
Tilt Adjust Table
Figure 4-99 Fit the Tilt Adjust Table
4. Fix the camera body to the wall bracket with the removed tilt adjust screw.
169