Epson CX6500 Reference Manual page 246

Look at the alignment patterns. Find the pair of vertical lines that is aligned in pattern #1, then
enter the number using the numeric buttons. Finally, press the Color button.
The next pattern number appears. As with pattern #1, find and register the aligned pairs for the
remaining alignment patterns #2 through #5.
After setting all of the alignment patterns, Head alignment appears on the LCD panel again. If
you want to continue the print head alignment operation, press the Color button to print the
alignment patterns again; otherwise, press the Stop button.
Note:
Even if you press the Stop button, the settings you made in step 5 remains saved.
Look at the alignment patterns. Find the pair of horizontal bars with no dark or light band
between them, then select the number of the pair using the numeric buttons.
Press the Color button to register your
selection.
If you want to continue the print head alignment operation, press the Color button to print the
alignment patterns and repeat steps 7 and 8. If you want to stop the print head alignment
operation, press the Stop button.
After all patterns are set, the print head alignment operation is completed.
[Top]