Cisco SCH-CONTROL-200 Reference Manual page 4

Mounting the Cisco Controller 200 on a Wall
Figure 2
1 Slots to horizontally mount the Controller 200
2 Holes for attaching the plate to the Controller 200
3 Slots to vertically mount the Controller 200
Use the four (4) screws (provided) to attach the mounting plate to the bottom of the Controller 200.
Step 2
Ensure that the narrow end of the slots will be on top when the device is installed.
Step 3 Arrange the wires to fit in the wire channels on the mounting plate.
Line the slots on the mounting plate up with the screws.
Step 4
Press the device onto the screws and slide down until the screws are in the narrow end of the slots.
Step 5
Cisco Smart+Connected Controller 200 Reference Guide
4
Mounting the Cisco Controller 200
OL-27357-01