Display Screen - Hitachi HF-W2000 Instruction Manual

3. DISPLAY SCREEN

<Specifications>
・Before you set up the screen, terminate all running application software.
・When you change connections to switch between single- and multi- display
configurations, turn off the power to the equipment, change the connection of display
cables, turn the power back on, and then set up the screen configuration.
・When you change the connection configuration for the displays, reconfigure the screen
settings accordingly.
・Depending on application software, the screen may flicker and video playback may not be
smooth.
・The multi-stream function (daisy chain) of DisplayPort is not supported.
・If a display unit connected with DisplayPort is turned off, the display cannot be detected.
(The display image assumes Windows® 10 IoT but it is similar under other OS.)
<Required action>
・ If you want to enable "Collage" for multiple displays, use displays that support Display
Data Channel (DDC). When you use displays that do not support DDC, you cannot
enable "Collage".
C-6