Chapter 7 Restoring The Factory-Shipped Condition Usinga Recovery Dvd; Overview Of Restoration Procedure - Hitachi HF-W2000 Instruction Manual

7. RESTORING THE FACTORY-SHIPPED CONDITION USING A RECOVERY DVD
CHAPTER 7 RESTORING THE FACTORY-SHIPPED CONDITION
USING A RECOVERY DVD
This chapter describes the following procedure:
・The procedure to restore the system drive back to the factory-shipped conditions when you
discontinue the system you have built.

7.1 Overview of Restoration Procedure

This section describes the overview of the procedure to restore the system drive back to the
factory-shipped condition when you discontinue the system you have built. After you restore
the contents of the system drive back to the factory condition, follow the procedure described
in "CHAPTER 3 SETUP" to set up the OS.
The following is a rough flow chart of the procedure.
Preparation
Restoring the factory condition
Setting up the OS
For details, see "7.2 Preparation".
・This shows a list of the items you need to prepare and
the items you need to decide or check before you start
restoration work.
For details, see "7.3 Restoring the System Drive Back to
the Factory-Shipped Condition".
・The contents of the system drive are restored back to
the factory-shipped condition.
・The procedure depends on the OS.
Windows® 10: about 25 minutes
Windows® 7: about 20 minutes
For details, see "CHAPTER 3 SETUP".
7-1