Cisco MX series Getting Started Manual page 23

Cisco TelePresence Video Systems

Introduction
Cisco Unified Communications Manager
Contact your CUCM administrator to get the information
needed.
Enter IP address or DNS name in the Host server address
and select OK to confirm the change*.
You can find more details about setting up CUCM provisioning
in the Administering CE endpoints on CUCM
* The DHCP server can be set up to provide the Host server address
automatically (DHCP Option 150). Any input set up here overrides the
setting provided by DHCP.
D15318.02 Video Systems Getting Started Guide CE8.1, APRIL 2016.
User interfaces Web interface
CUCM via Expressway
Contact your CUCM administrator to get the information
needed.
field, Enter Username,
input fields. Always select
Apply to save.
guide. In some cases, you must manually enter the Expressway
address. Select
enter the address you have received upon ordering in the
Server Address
On-screen setup assistant On-screen setup assistant
Passphrase and Domain in the corresponding
OK to confirm the changes. Select
Manually override Expressway address, and
field.
23
Touch
VCS
Contact your VCS provider to get the information needed.
1. Enter IP address or DNS name of the Cisco VCS in the
Host server address and select
2. Enter the Username, and Passphrase, if required, for
authenticating the video system with the provisioning
server. Select OK to confirm the change
Host
3. Enter SIP Domain and select
4. Select Apply to save the changes.
Have a look at the Cisco VCS provisioning
information on VCS provisioning.
To check that the SX10 is registered: Navigate to the
gearwheel icon in the upper left corner of the home
screen and select System
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
Getting Started Guide
Appendices
OK to confirm the change.
OK to confirm the change.
appendix for more
Information.