Canon EOS C700 Instruction Manual page 72

Simultaneous Sub Recordings
4 Select the desired LUT and then press SET.
5 Press the REC button to start and stop recording.
• The sub recording clip will be recorded on the CFast or SD card simultaneously with the main recording.
72
IMPORTANT
• Observe the following precautions while an access indicator is illuminated in red. Failure to do so may result in
permanent data loss.
- Do not open the card slot cover of the card being accessed and do not remove the card.
- Do not remove the power source or turn off the camera.
NOTES NOTES
• If the main recording stops during simultaneous recording, the sub recording will stop as well.
• Sub recording clips are not recorded during slow & fast motion recording.
• During relay recording, if the camera switches from recording on one CFast card to the other (main recording),
the recording of the XF-AVC Proxy clip on the SD card (sub recording) will be interrupted as well and continue
as a separate XF-AVC Proxy clip.
• When an SDHC card is used to record XF-AVC Proxy clips, the video (stream) file in an XF-AVC Proxy clip will
be split approximately every 4 GB for clips with long recording times. Still, playback on the camera will be
continuous.
• Available LUT options may vary depending on the current [Gamma] and [Color Space] settings in the custom
picture file (A 134). Also, when those settings are changed, the LUT will be removed ([Apply LUT] will be
reset to [Off]).
• When simultaneous sub recording is activated but no CFast card is inserted in the camera:
- If the main recording format is set to [XF-AVC (CFast)], only the sub recording (XF-AVC Proxy) clips are
recorded on the SD card.
- If the main recording format is set to [ProRes (CFast)], sub recording clips will not be recorded either.