Table of Contents
Advertisement
Chapter 3 Setup
Category
Security
Set a password
Restrict bootup by entering
password
Execute TBOOT (Trusted Boot)
using the option TPM kit.
UPS
When the server is supplied
Powerlink
with power from UPS, always
turn on the power.
If it is turned off by using
POWER switch, leave it OFF
even when UPS supplies
power.
Keep the power OFF even
when UPS supplies power.
162
Description
Security → Administrator Password →
Enter a password
(Set a password for Administrator first
and then User)
Security → Password on Boot →
Enabled
Mount the option TPM kit, select
[Security] and set the following items
under the [Trusted Computing] submenu
to [Enabled].
・[TPM Support]
・[TPM State]
・[TXT Support]
Server → Power Control Configuration
→ AC-LINK → Power On
Server → Power Control Configuration
→ AC-LINK → Last State
Server → Power Control Configuration
→ AC-LINK → Stay off
Express5800/R120g-2E User's Guide
2. BIOS Setup Utility (SETUP)
To be changed
There are two types of
password; Administrator and
User.
Settings for User password is
limited compared to for
Administrator.
Can be selected when
password is set.
Do not disable TPM with the
TPM management module with
[TXT Support] set to [Enabled]
and the OS started. Otherwise,
it will be no longer possible to
change [TPM Support] and
[TXT Support].
In that case, execute [Save &
Exit] and [Load Setup Defaults].
Remark
Advertisement
Table of Contents
