NETGEAR PS 104 Quick Installation Manual page 6

Rear Panel
The rear panel of the Model PS104 Print Server has one parallel PRINTER port, and the Model
PS110 Print Server has two parallel ports for printers (PRINTER 1 and PRINTER 2). The ports on
both print servers accept either printers or another parallel device such as a plotter. Because the
Model PS110 Print Server has two PRINTER ports, two parallel devices can be connected and can
operate simultaneously.
The Model PS104 Print Server has four 10BASE-T network ports, and the Model PS110 Print
Server has one 10/100BASE-T network port. The Model PS104 Print Server has a Normal/Uplink
push button switch to set port 1.
Both models have a power adapter receptacle that accepts a 12 V DC power adapter.
PRINTER
(parallel) port
PRINTER
Rear Panel of the Model PS104 Print Server
PRINTER 2
(parallel) port
PRINTER 2
Rear Panel of the Model PS110 Print Server
Normal/Uplink Push Button (Model PS104 Only)
The Normal/Uplink push button on the Model PS104 Print Server allows you to select Normal
(MDI-X) or Uplink (MDI) wiring for NETWORK port 1, eliminating the need to use a crossover
cable. Ports 2 through 4 on the Model PS104 Print Server are permanently configured for Normal
wiring; the one network port on the Model PS110 Print Server is permanently configured for
Uplink wiring.
Model PS104 and Model PS110 Print Server Quick Installation Guide
NETWORK ports
(10BASE-T connectors)
NETWORK
4 3 2 1
Normal/Uplink
PRINTER 1
(parallel) port
NETWORK
PRINTER 1
Normal/Uplink
push button
12VDC 1.2A
Power adapter
receptacle
NETWORK port
(10/100BASE-T
connector)
12VDC 1.2A
Power adapter
receptacle
8514FA