Get Started; Prepare Fm/Dab+ Antenna; Connect Power; Set Clock - Philips AJB4300 User Manual

3 Get started

Always follow the instructions in this chapter in
sequence.

Prepare FM/DAB+ antenna

For better reception, fully extend and adjust the
position of the FM/DAB+ antenna.
Note
•
To prevent interference, position the antenna as far as
possible from any other radiation sources.

Connect power

Caution
•
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the clock radio.
•
Risk of electric shock! When you unplug the AC plug,
always pull the plug from the socket. Never pull the
cord.

Set clock

Note
•
You can only set time in standby mode.
1
Press and hold SET TIME for two seconds
to activate clock setting mode.
» The hour and minute digits blink.
2
Press + TUNING/ HR - to set hour.
3
Press + PRESET/ MIN - to set minute.
4
Press SET TIME to confirm.
5
Press + TUNING/ HR - to set 12/24 hour
format.
6
Press SET TIME to confirm.
» [Time Saved] (time saved) is displayed.
Tip
•
When the radio is idle for 10 seconds, it exits clock
setting mode automatically.
•
In FM/DAB+ mode, you can enter the "System" menu
to set time synchronization (see "Use system menu" >
"Set time and sync time").
EN 5