5 Listen to FM
radio
Tune to FM radio stations
Tip
•
Position the antenna as far as possible from any
electrical appliances.
•
For better reception, fully extend and adjust the
position of the antenna.
1
Press SOURCE to select FM mode.
2
Press and hold + TUNING/ HR - for two
seconds.
» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more radio
stations.
To tune to a station manually:
•
In FM tuner mode, press + TUNING/ HR
- repeatedly to select a frequency.
Store FM radio stations
automatically
In FM tuner mode, press and hold SCAN
•
for two seconds.
» The radio stores all the available FM
radio stations, and then broadcasts the
first available station automatically.
Store FM radio stations
manually
Note
•
You can store a maximum of 20 FM radio stations.
1
In FM tuner mode, tune to an FM radio
station.
2
Press PROG to enter programming mode.
» The preset number begins to blink.
3
Press + TUNING/ HR - repeatedly to
select a number.
4
Press PROG to confirm.
5
Repeat steps 1 to 4 to store other stations.
Tip
•
To remove a pre-stored station, store another station
in its place.
Select a preset FM radio
station
•
In FM tuner mode, press + PRESET/ MIN -
repeatedly to select a preset radio station.
Use FM menu
1
In FM mode, press and hold MENU for
two seconds to access FM menu.
2
Press + TUNING/ HR - to scroll through
the menu options:
[Scan setting]
•
[System] (see the Chapter "Use
•
system menu")
3
To select an option, press SELECT.
4
Repeat steps 2 to 3 if any sub-option is
available under one option.
[Scan setting] (scan setting)
[All stations] (all stations): scan all the
•
available FM radio stations.
[Strong stations only] (strong stations
•
only): scan FM radio stations with
strong signals only.
EN
9