Remote Control Batteries - Panasonic TY-RM09SL Operating Instructions Manual

Features
You can easily download the master set setting to the Set Up Loader and install the same setting to a
number of other sets.
As for the applicable models, refer to the manual of the Panasonic terminal board with "Hospitality Port".
Note:
Be sure that the master set and sets to which Set Up Loader data are to be copied are the same model,
with the same terminal boards installed in the same slots, before copying the master set settings to the
Set Up Loader or other sets.
Ex:
Master set: TH-42PG9W with TY-FB8TA installed in slots 2, 3
The set to which Set Up Loader data is to be copied: TH-42PG9W with TY-FB8TA installed in slots 2, 3
Accessories
Check to make sure that the following accessories are included in the Set Up Loader package:
Operating Instructions

Remote Control Batteries

1
To open the cover, slide it downward.
Battery Precautions
Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and
may cause a fire.
• Do not mix old and new batteries.
• Do not use different types at the same time. (ex. zinc carbon and alkaline)
• Do not heat or expose to flame.
• Do not take apart or short circuit.
• Do not attempt to recharge, short-circuit, disassemble, heat or burn used alkaline or manganese
batteries.
• Replace the batteries if the remote control does not work properly.
Connection
(Example: TY-FB8TA)
Back view of the unit
Note:
Before connecting, be sure to turn the unit off.
2
Remote control batteries
(2 x R6 (AA) Size)
2
Insert batteries. Note the correct polarity
(+ and -).
R6(AA) size
R AUDIO L
IN
SLOT1
Set Up Loader
Connecting cable
(1.5 m)
R AUDIO L
VIDEO IN VIDEO OUT
OUT
AV Hospitality Port VHF/UHF
S VIDEO IN
SLOT2 SLOT3
Mini-plug (M3)
stereo
Ir System
PC IN
Connecting cable
(accessory)