Table of Contents
Advertisement
Nomenclature
■ Front face of the main unit
3
Front stand
1
Rear stand
2
Headphone terminal
3
USB port
4
CH1 to 3 buttons
5
CDL button
6
F1 to F8 buttons
7
MENU button
8
Jog dial
RESET button
(Power) button
9
Power indicator
A q
12
Nomenclature
1
2
4
There are two mounting positions.
This can be detached.
Connection for headphone set.
Connection for an external sensor for calibration (
grading controller (Element-Tk made by Tangent Wave Ltd).
Changes channel.
Switches between normal and CDL mode.
Execute the defined function. You can assign different functions on F buttons in the
normal and CDL modes respectively.
Opens/closes the OSD menu, or moves up one level in a menu.
Moves the selection frame within the OSD menu, changes the settings (up/down, left/
right, rotation) and determines (press) the selection.
Resets the items to be adjusted using the slider and entered characters.
Turns power On/Off.
Displays the status of the main unit. The brightness of the power indicator can be set
from "Off" or "1 (dark) to 5 (brightest)" (
will flash during firmware update, or when an error is detected.
Off: when power supply is not connected
Green lit: when a power supply is connected and the power of the video display is on
Green flash: during calibration or firmware update
Amber lit: during standby (a power supply is connected and the power of the video
display is off)
Amber flash: when error is detected
6
5
7
70). Even when the power indicator is "Off", it
1
2
A q
8
9
26), USB memory, HUB, or color
16
16
55
–
32
–
31
22
22
22
21
–
Advertisement
Table of Contents
