Specifications - Makita BPT350 Instruction Manual

ENGLISH
1-1. Red part
1-2. Button
1-3. Battery cartridge
2-1. Trigger
2-2. Lever
3-1. Sliding door
4-1. Lever
5-1. Trigger
6-1. Bolts
6-2. Driver guide cover

SPECIFICATIONS

Pin nail magazine capacity
Dimensions (L x W x H)
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for pressing pin nails into
construction materials such as timbers.
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is 74 dB (A).
The noise level under working may exceed 85 dB (A).
Wear ear protection.
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
These values have been obtained according to EN792.
Explanation of general view
7-1. Lamp
7-2. Lever
8-1. Driver guide
8-2. Pin nails
8-3. Magazine
8-4. Lock lever
9-1. Driver guide cover
9-2. Protrusion
9-3. Nose adapter
9-4. Holder
Model
Pin nail size
Net weight
Rated voltage
equipment and
environmentally compatible
2
.
END004-1
EC-DECLARATION OF CONFORMITY
Model; BPT350
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745,
Directives, 2004/108/EC, 98/37/EC.
its
000230
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
ENE068-1
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
ENG043-1
ADDITIONAL SAFETY RULES
FOR TOOL
1. Always
fasteners. Careless handling of the tacker can
result in unexpected firing of fasteners and
personal injury.
2. Do not point the tool towards yourself or
anyone nearby.
discharge the fastener causing an injury.
3
11-1. Groove
11-2. Hook
11-3. Screw
12-1. Hex wrench
13-1. Trigger
13-2. Material to be fastened
15-1. Bolt (B)
15-2. Driver guide cover
15-3. Bolt (A)
BPT350
0.6 x 18, 25, 30, 35 mm
130 pcs
227 mm x 79 mm x 245 mm
2.0 kg
D.C. 14.4V
EN55014 in accordance
CE2006
Tomoyasu Kato
Director
assume that the
Unexpected triggering
ENH102-6
with Council
ENB104-1
tool contains
will