Samsung iDCS500 Manual page 57

4-18 Chapter 4
Business Feature Package
Recall. Calls transferred across a network link will recall to the transferring station after
Transfer
the originating systems transfer recall timer expires. After recalling, if not answered prior to that
systems attendant recall timer expiring, the call will recall to that systems designated operator group.
Attendant recalls will not recall to a 'Centralized Attendant".
DID with Pass
a network link to be processed by the DID table of the destination switch.
Do Not Disturb
There is an option in MMC 823 to determine the type of DND tone sent across the network link.
ID. Caller ID in its various forms that are currently available (Analog CID Name and Number,
Caller
ANI Number, PRI Name and Number and BRI number) will be transported across the network link
with the original call.
Centralized
designated Central attendant group. Each system on the network requires its own designated
attendant group for local usage, recalls and the like.
Intercom Calling/Uniform dialing
across the network link without having to dial an access code for a call within the network. LCR can
also be programmed to route calls across a network link to access local trunks in another networked
system.
Centralized Voice Mail with Message Waiting
and/or SVMi voicemail systems only. Users in one node can call forward (CFNR, CFB & CFU) to the
Cadence group in a different switch and messages left in that switch will be indicated on the VMSG
key in the origination switch. Messages can be returned to the CVMAA by pressing the VMSG key.
Off Premises Extensions (OPX)
A single line (tip and ring) extension from an 4SLI card may be connected to telephone company-
provided OPX circuits to remote locations. 8SLI cards and KDb-SLIs do not support off premises
extensions.
Operator Group
The operator group can contain 32 stations to answer incoming calls. Calls to this group can be set
for distributed, sequential or unconditional ringing. Operators can use the In/Out of Group feature
to meet flexible operator requirements. Operator groups are selectable per ring plan.
Overflow
OPERATOR OPERATOR OPERATOR OPERATOR
When calls ringing a operator group go unanswered, they can overflow to another destination after a
programmed period of time. The operator group has its own timer. The overflow destination can
be a station or station group.
STATION GROUP STATION GROUP STATION GROUP STATION GROUP
When calls ringing a station group go unanswered, they can overflow to another destination after a
programmed period of time. Each station group has its own timer. The overflow destination can be
a station or station group.
Through. Incoming DID, DNIS or DDI calls can be routed through one switch across
(DND). This feature operates in the same manner as in a non networked switch.
Attendant. This feature basically allows a user in any switch to dial "0" and ring at the
plan. Station to station and station to group calls can be made
Lights. This feature will only operate with Cadence