GE C30 Instruction Manual page 32

2.1 INTRODUCTION
c) ORDER CODES WITH PROCESS BUS MODULES
The order codes for the horizontal mount units with the process bus module are shown below.
Table 2–4: C30 ORDER CODES (HORIZONTAL UNITS WITH PROCESS BUS)
C30 - * ** - *
BASE UNIT C30 | |
CPU E |
J |
K |
2
N |
S |
SOFTWARE 00
01
03
04
MOUNT/COATING
FACEPLATE/ DISPLAY
POWER SUPPLY
(redundant supply must
be same type as main supply)
PROCESS BUS MODULE
DIGITAL
INPUTS/OUTPUTS
INTER-RELAY
COMMUNICATIONS
(select a maximum of 1 per unit)
2-4
* * - F ** - H ** - M ** - P
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
H | | | | |
A | | | | |
C | | | |
D | | | |
R | | | |
A | | | |
P | | | |
G | | | |
S | | | |
B | | | |
K | | | |
M | | | |
Q | | | |
U | | | |
L | | | |
N | | | |
T | | | |
V | | | |
W | | | |
Y | | | |
H | | |
H | | |
L | | |
L | | |
| 81 |
XX XX
C30 Controller System
** - U ** - W/X ** Full Size Horizontal Mount
| | | Base Unit
| | | RS485 and RS485
| | | RS485, multi-mode ST 100Base-FX and 10/100Base-T
| | | RS485, multi-mode ST redundant 100Base-FX and 10/100Base-T
| | | RS485 and 10/100Base-T
| | | RS485 and 6-port managed Ethernet Switch
| | | No software options
| | | Ethernet Global Data (EGD); not available for Type E CPUs
| | | IEC 61850; not available for Type E CPUs
| | | Ethernet Global Data (EGD) and IEC 61850; not available for Type E CPUs
| | | Horizontal (19" rack)
| | | Horizontal (19" rack) with harsh environmental coating
| | | English display
| | | French display
| | | Russian display
| | | Chinese display
| | | English display with 4 small and 12 large programmable pushbuttons
| | | French display with 4 small and 12 large programmable pushbuttons
| | | Russian display with 4 small and 12 large programmable pushbuttons
| | | Chinese display with 4 small and 12 large programmable pushbuttons
| | | Enhanced front panel with English display
| | | Enhanced front panel with French display
| | | Enhanced front panel with Russian display
| | | Enhanced front panel with Chinese display
| | | Enhanced front panel with English display and user-programmable pushbuttons
| | | Enhanced front panel with French display and user-programmable pushbuttons
| | | Enhanced front panel with Russian display and user-programmable pushbuttons
| | | Enhanced front panel with Chinese display and user-programmable pushbuttons
| | | Enhanced front panel with Turkish display
| | | Enhanced front panel with Turkish display and user-programmable pushbuttons
| | | 125 / 250 V AC/DC power supply
| | RH 125 / 250 V AC/DC with redundant 125 / 250 V AC/DC power supply
| | | 24 to 48 V (DC only) power supply
| | RL 24 to 48 V (DC only) with redundant 24 to 48 V DC power supply
| | | Eight-port digital process bus module
XX XX XX No Module
4A 4A | 4 Solid-State (no monitoring) MOSFET outputs
4B 4B | 4 Solid-State (voltage with optional current) MOSFET outputs
4C 4C | 4 Solid-State (current with optional voltage) MOSFET outputs
4D 4D | 16 digital inputs with Auto-Burnishing
4L 4L | 14 Form-A (no monitoring) Latching outputs
67 67 | 8 Form-A (no monitoring) outputs
6A 6A | 2 Form-A (voltage with optional current) and 2 Form-C outputs, 8 digital inputs
6B 6B | 2 Form-A (voltage with optional current) and 4 Form-C outputs, 4 digital inputs
6C 6C | 8 Form-C outputs
6D 6D | 16 digital inputs
6E 6E | 4 Form-C outputs, 8 digital inputs
6F 6F | 8 Fast Form-C outputs
6G 6G | 4 Form-A (voltage with optional current) outputs, 8 digital inputs
6H 6H | 6 Form-A (voltage with optional current) outputs, 4 digital inputs
6K 6K | 4 Form-C and 4 Fast Form-C outputs
6L 6L | 2 Form-A (current with optional voltage) and 2 Form-C outputs, 8 digital inputs
6M 6M | 2 Form-A (current with optional voltage) and 4 Form-C outputs, 4 digital inputs
6N 6N | 4 Form-A (current with optional voltage) outputs, 8 digital inputs
6P 6P | 6 Form-A (current with optional voltage) outputs, 4 digital inputs
6R 6R | 2 Form-A (no monitoring) and 2 Form-C outputs, 8 digital inputs
6S 6S | 2 Form-A (no monitoring) and 4 Form-C outputs, 4 digital inputs
6T 6T | 4 Form-A (no monitoring) outputs, 8 digital inputs
6U 6U | 6 Form-A (no monitoring) outputs, 4 digital inputs
6V 6V | 2 Form-A outputs, 1 Form-C output, 2 Form-A (no monitoring) latching outputs, 8 digital inputs
2A C37.94SM, 1300nm single-mode, ELED, 1 channel single-mode
2B C37.94SM, 1300nm single-mode, ELED, 2 channel single-mode
2E Bi-phase, single channel
2F Bi-phase, dual channel
2G IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 1 Channel
2H IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 2 Channels
72 1550 nm, single-mode, LASER, 1 Channel
73 1550 nm, single-mode, LASER, 2 Channel
74 Channel 1 - RS422; Channel 2 - 1550 nm, single-mode, LASER
75 Channel 1 - G.703; Channel 2 - 1550 nm, Single-mode LASER
76 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 1 Channel
77 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 2 Channels
7A 820 nm, multi-mode, LED, 1 Channel
7B 1300 nm, multi-mode, LED, 1 Channel
7C 1300 nm, single-mode, ELED, 1 Channel
7D 1300 nm, single-mode, LASER, 1 Channel
7E Channel 1 - G.703; Channel 2 - 820 nm, multi-mode
7F Channel 1 - G.703; Channel 2 - 1300 nm, multi-mode
7G Channel 1 - G.703; Channel 2 - 1300 nm, single-mode ELED
7H 820 nm, multi-mode, LED, 2 Channels
7I 1300 nm, multi-mode, LED, 2 Channels
7J 1300 nm, single-mode, ELED, 2 Channels
7K 1300 nm, single-mode, LASER, 2 Channels
7L Channel 1 - RS422; Channel 2 - 820 nm, multi-mode, LED
7M Channel 1 - RS422; Channel 2 - 1300 nm, multi-mode, LED
7N Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, ELED
7P Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, LASER
7Q Channel 1 - G.703; Channel 2 - 1300 nm, single-mode LASER
7R G.703, 1 Channel
7S G.703, 2 Channels
7T RS422, 1 Channel
7W RS422, 2 Channels
2 PRODUCT DESCRIPTION
GE Multilin